The spark plug wires are one of the elements of ignition system of gasoline-powered vehicles. Its function is to unite the distributor with ignition coils y the spark plugs, so that the electrical current can flow and cause the spark, which will create combustion inside the cylinder, allowing the engine to work.
Although spark plug wires may seem like very simple items, without maintenance, they should be paid attention to. Over time can deteriorate and negatively affect the operation of our engine and fuel consumption.
Spark plug wires, what are they for?
They are essential so that there is an optimal spark in the spark plug. Keep in mind that the ignition system works at a high voltage, approximately between 10.000 and 30.000 volts.
A Pair of faulty ignition wires They can manifest in many ways. The main problem is that they will not carry the necessary electrical current to get a good spark, which can lead to vibrations in the engine, higher levels of pollution and consumption derived from poor combustion or pulling.
Spark plug wire faults
The first inspection of the spark plug wires will be visual. if they are appreciated cracks in the coating or breaks in the union caps, it is advisable to change them. The cable coating protects the conductive part of the cables from external agents and electrical interference, essential for proper ignition operation.
An advice: we must try that the cables do not touch each other or to other parts of the engine to prevent the protective cover from being worn away by vibrations.
To put new ones you must make sure of the compatibility of your car and buy good quality ones. On the contrary your car may lose power, efficiency and even durability.
Measure the resistance (Ω) of the ignition cables
Another way to check if the spark plug wires are in good condition is check your resistance. To do this, you have to remove the cables and with a multimeter, put a terminal on each of the ends to see the resistance.
To render a verdict, we'll need to know the correct resistance value of those ignition wires. If we don't know, all we can say is that should be similar in all of them. If you see that one has much more resistance, you will have found the problem.
FOR check resistance of ignition wires (or any conductor of electricity), you must follow these steps:
- The first thing is to choose the correct option with the letter Omega (Ω) that indicates Resistance and that measures in Ohms.
- Then choose the suitable scale for operation, which in the case of a cable is usually at the lowest measured by a conventional multimeter. For example: 200 Ohms.
- Then you must insert wires. The black on the common connection (COM) which is black and the red wire on which you put O. On many occasions this connection is for several different functions and will come with other letters. For example: VOHz.
- Finally, it is about put the test leads on both ends of the item to be measured. In this case the ignition cables. The multimeter will indicate the resistance what's wrong with it. In a cable it is usually close to 0,01 Ohms. That is, a very low resistance.
Other Symptoms of Bad Spark Plug Wires
With spark plug wires like this, nothing can go right.
- As we have already said, the main symptom will be a “erratic” engine operation, that is, something similar to "now it works fine, now it seems that I jerk". This symptom is more evident during acceleration phases and sometimes at idle, and may sometimes be accompanied by vibrations.
- hot spots or melted sections in cables and nearby metal areas.
- Interference with other equipment. Due to the high voltage of the equipment, the possible derivations of the cables can affect other electrical systems, mainly the radio and the stereo, being able to hear a buzz that varies to the rhythm of the engine speed.
- loss of power and increased consumption. Just like when we have dirty spark plugs or the air gap or "gap" of them is poorly adjusted, defective cables will cause a poor spark and harm correct combustion.
When removing the ignition cables, it is important not to pull on the cable itself, but on the caps on the ends. Manipulate the ignition system can be dangerous due to high voltage at which the system works, so we must disconnect the battery and wait a while for everything to discharge. If we are not sure what we are doing, it is advisable to leave the problem in the hands of a qualified mechanic.
When we remove the cables and go to place them, it is important remember their position. The length of the wires can help, but it's important to number each wire with each spark plug and its position on the distributor or coil.
If we put the cables in the wrong way, the motor would not work. In these times, number the cables and a simple photo before releasing anything It will save us a lot of headaches.
In danger of extinction
independent coil
The spark plug wires are increasingly in Danger of extinction. While they are easy to find on older cars (especially with a distributor), newer models with electronically controlled coils often do without the cables.
This may be because they are independent coils, with a module from which the connector that goes to the same spark plug arises. Other vehicles with electronic ignition have an ignition coil for every two cylinders and in many cases, one of the connectors is directly attached to the coil, while the second plug is fed through a conventional cable. messy?
How to change spark plug wires
Although the use of wires for spark plugs is disappearing, your car may still use them. It is always easier to leave the job to a trusted workshop where they can make the change easily, but if you prefer to do it yourself, there are a number of Precautions before you get to work.
Precautions
Keep in mind that you will be working with a series of elements that carry high voltage current to the spark plugs, so disconnect the car battery and wait a while before starting. Do it with the engine cold so you don't burn yourself. Be methodical in everything you do so you don't connect the coil to the wrong spark plug. Avoid having liquids nearby when you work, the connectors will not get wet.
Locate ignition wires
There are cars that have them perfectly in sight and others in which you have to search a bit to find them. In any case, the most usual thing is that it is enough with remove the cover that covers the motor to see them easily. For this you will need some tool to remove the screws that hold it, which will normally be a socket wrench. If you don't see the screws, they may be covered by a plastic cap.
Take note of the characteristics of the cables
If you are going to use an original or specific kit for your car, measure the length of your old cables ignition to find the correct measurement. Going too far can be an error almost as serious as falling short, since they usually follow a specific route that should not be left due to an excess in the measure. They could touch moving or hot engine parts and could deteriorate quickly.
There are cable kits that are adjustable in length. If you opt for one of them, make sure they are of good quality and be very careful when placing the end hooks.
If you don't do it right, they can get loose and give you quite an upset. You must also have the number of wires needed. You wouldn't be the first to buy them separately instead of buying a kit and order four when they needed six.
Pull out the spark plug wires
To remove them you may need a pliers or wrench to remove spark plugs. You can get one for little money. You should remove them from the end that goes to the spark plug and the one that goes to the coil. Always pull the cuff, because if you pull the cable itself you could break it and leave the connection anchored to the coil or to the spark plug. These cables are usually very well secured to prevent them from being disconnected in the middle of driving. Make sure they do not have any extra fastening method such as a tab or similar. If you can't pull them out, try moving it from side to side to detach it.
Important: Take note of the placement of each cable so as not to make a mistake. You can remove one and put the new one each time, instead of removing them all at once. This way you will avoid confusion.
Install the new spark plug wires
You should put the new cables into the same jacks or "plugs" that the old ones were on. Connect a cable from the spark plug to the wrong coil could cause motor damage when turned on. In addition to hooking them onto the spark plug and coil, the wires they usually have other hooks or grooves that guide them through the route correct not to cross. Make sure they follow the same path as the old cables. If these hooks have fallen or been damaged, spacers are sold that can be used to prevent your cables from becoming loose along their route.
High performance spark plug wires
There are spark plug cables designed for higher performance. Although there are people who have installed them in their car, by themselves they do not suppose any improvement compared to conventional spark plug wires. Now, it is an element that used when modifying other engine partssuch as a higher voltage coil and high performance spark plugs.
Of course, even if the three elements are completely changed for higher performance ones, it does not mean that it will gain in power either. All the components of the car are designed to perform optimally by themselves, so it is usually not a good idea to change them for others even if they are supposed to be more effective.
This kind of high performance components are often used as part of a larger engine modification, either for competition or simply to increase its power. They only serve to respond to changes such as retouching the engine block, put a switchboard or other modifications to increase your CV, and many times it is not even necessary.
spark plug wire price
The price of the spark plug cable kit varies a lot depending on the manufacturer and the number of ignition cables that it is made up of. A kit for a small utility vehicle with a four-cylinder engine is not the same as one for a sedan with six or eight. Anyway, the price usually ranges between 30 and 60 euros, although there are exceptions that are out of the norm.
Images 3, 4 and 6 – 3ndymion, SportscarWorkshops, Gareth Halfacree, 3ndymion
Greetings, but when testing an 8mm cable with a multimeter on what scale do you recommend placing it, the length of the cable changes the resistance value, open an approximate value, say 35 ohms
Hello, I have a problem finding the spark plugs in my truck, it is a DODGE RAM 1500 2004 8 CYLINDERS 4.7L and because I am looking for it I cannot find the distributor or the cables for the spark plugs or the spark plugs, does anyone know what this means
I imagine that it uses the DIS system, that is, it no longer has a distributor or cables, it uses one coil per cylinder. Greetings. and I hope it works for you
If you can't find the spark plugs, it's because your truck is diesel, and diesels don't work by spark jump but by explosion. Come on, you can spend your life looking for them and you wouldn't find them.
I urgently need help, my father disconnected the spark plug wires to install new ones and now he doesn't remember the order in which they were. It is an opel astra 1600 gasoline from 91. If anyone knows what the order is, please tell me. Thank you.
what spark plug cable can you put an electronic car
Spark plug cables made of colored serpentine are put on electric cars because electric cars are for sissies
I have a problem because of the spark plug wires and now between the spark plug and the wires the spark got heavy and the engine sounds strange it is a truck for f 150 6 silindo 4.2
A high voltage passes through the cables to the spark plugs, for this reason they should always be fine because the car does not start when the current is jumped, and the cables must be changed, and they have an ignition order, in the coil and in the spark plug where it goes, for this reason you have to know the ignition order of the car or change one by one, so as not to make mistakes, if the cables are changed the car does not start
Octa
great thing about the test of the spark plug cables, but I have a doubt, my goal model 95 mot. 1.6 audi fails me regulating change cover and rotor and I see that the cables light up at some points that rub against some cable or metal, well I thank anyone who knows something, haaaa. I forgot you can see the light but the spark didn't come out I touched them and it didn't do anything to me...
I need to get the terminals of the spark plug cables, that is, the caps of the tip and I don't know where they can be bought loose, I'm from Argentina, I appreciate the information, regards
I need help, I have disconnected the spark plug wires to install new ones and now I can't remember the order in which they were. It is a 400 gasoline engine, the numbers on the valve cover do not appear. If anyone knows what the order is, and if by chance these motors work with even or odd numbers, that is, 2-4 6-8, 1-3 5-7. Thanks
Good
I have a volvo 850 from 94, automatic, 2.4L engine, I removed the spark plug wires to change them and now I can't remember and the car won't start
Can someone help me and tell me how the cables go
Thank you
my pick up turns on but it doesn't stay put i have to speed it up or step on the gasoline what do i do several mechanics have come and they can't find a ball
I need help
distributor
ishmael.
have test with the following order 1-3-4-2. That's a pretty common firing order. tell me luck
I solved the problem by researching the internet, I was lucky and found the solution. Miguel, thanks and all the previous ones also for the help. (and if the order is that).
Hello: I need help with the following problem, I have a new race Mazda 626 LX, it happens that when I change gear the car jerks as if it were doing 2 changes at the same time, check the spark plugs and it's fine, and the mechanic tells me that the problem is it is in the high cables and there may be a jump in current when making the change and they have to be changed, is this true? please help me thanks.
what would happen? If I change the spark plug cables for my 1.3 Lada Samara car for 8mm ones.
hello, excuse me, I have a 12-cylinder dodge viper 99 7.0 engine and I don't know what to do because when I accelerate it, it just revs and it doesn't move
In addition, it does not have the same power as before, that happened to me since a day when it rained a lot and even the exhaust sounded strange, as if it were an aim, I would really appreciate it if you know what is happening to you, tell me
and I also have another question if you can help me I have a cherokee srt-8 and I disconnected all the cables from the spark plugs and I don't know what to do can someone tell me what order they go
Hi, I have a 1996 Ford Thunderbird and I need to know the order of the spark plug wires.
I sell spark plug wires for toyota 5e, 4e, hyundai elantra, GA15 for gas and gasoline
Tell me, I'm in Lima Peru, how much does it cost me, I have a 2010 river, CNG, I changed the cables 2 months ago and now it's sparking.
Hello, I have a 99 Ford Expedition and the engine shakes a lot and a mechanic says that it is a cable that is wrong, but I don't know the order. Could someone tell me the order or send me a diagram?
I can't find the cables for a neon, for the moment I just changed the cables for ones with a copper core that I made myself using the same connectors; can this affect my engine?
I can't find the bukias, I don't know the order of the cables, what spark plugs should I use, what silly questions, what I suggest to all those who ask that is that they get a husband so that he can teach them mechanics sissy party
Hello good afternoon I need information. I have a 2001 automatic corsa I changed the spark plugs, the cables and the gasoline filter about a year ago. nevertheless; I went to turn the car on and it turned off, I turned it on again and it shook and it stayed on if I accelerated it and the electrical failure indicator light stayed on for a while. I am almost sure that it is the injectors (cleaning) now my question is if it would be necessary, in addition to cleaning the injectors, to also change the spark plugs, their cables and the gasoline filter. And how could I know if the changes are necessary or not in case the mechanic wants to do something that is not necessary to charge more. Thanks a lot
spark plugs and fuel filter yes … cleaning of injectors by laboratory ..
very good for your work I congratulate you
comrades i have a problem i have a suv expedition 2004 and i want to change the spark plugs but i cant find the wires where i showed the spark plugs if someone can give me a hand i would be very grateful
GOOD AFTERNOON MY UNCLE AND I HAVE A WORKSHOP AND A CHEVROLET SILVERADO Z-71 MODEL 91 ARRIVED THE GEARBOX THAT THE OWNER RECOMMENDS US DAMAGES SUGGESTS US, SUGGESTS US DUE TO ECONOMIC ISSUES IT IS NOT ENOUGH AND ON THE OTHER HAND MY UNCLE SAYS THAT IT IS AGA STANDARD BECAUSE HIS REPAIR OF THE AUTOMATIC GEARBOX IS VERY EXPENSIVE THAT HE SUGGESTS US.
Hello, I wanted to change the spark plug cables of a Stylo 1.0 motor model arosa seat, and I can't find them anywhere. The one with the spare parts tells me that they are hidden where the Coil is, well it is a long piece that is in the front part and that it is long.
I'm very bad at this mechanics, if someone can tell me where they are or what I need.
Thank you all.
All the best
DO YOU HAVE PROBLEMS WITH YOUR CAR? ASK ME, I WILL ANSWER ALL YOUR QUESTIONS
E-mail: polyhedro50@hotmail.com
look at my truck loses power the accelerator pulls but the speedometer did little, the other day cleaning the engine I realized that the spark plug wires were cut, and the old spark plugs would be the problem please guide me
what is the order of the spark plug wires for a 1995 grand prix gtp
I washed the spark plugs on my silverado 1500 mod. 94 and I don't remember the order in which the spark plug wires go, can you help me?
Well, I fuck all the mechanics' wives
and those who put comments on this page like that they give them back where the shit comes out with
rancid bean chunks
I have a 89 cylinder Toyota 6 and I have a problem. When changing the spark plugs the wires got mixed up, what are the consequences?
how is the order of the cables with the spark plugs of a ford falcon 84?
Hello, I am an automotive student and I would like you to answer a question I have about the relationship for calculating the resistance of the cables for the sparks plug. I think you have a formula or relationship per inch or per foot to obtain the resistance?
ok thank you please can someone answer me!!!
Thank you
I have a 1997 Ford Expedition and it has a tapping sound in one of the toe caps and when I uncover everything looks fine but that cap is a little dry I would like to know what I can do
Excuse me, I'm looking for what kind of cables would suit me. I even want to put some iridium spark plugs on my truck. It's exhaust, v6, 2003, please help.
hello, good afternoon, could someone help me to find out the order of the spark plug cables because I don't know, and the fact is that the car has a small jerk when you take it to 80 and stabilize it and the power cuts off when it's stopped. I would thank you a lot
It is 1342 if it is 4
the resistance value of a spark plug cable is 1000 ohms per inch you have to measure the cable and multiply the measurement in inches by 1000 example the cable measures 11 inches multiply 11 per thousand and that cable has to have a resistance of 11,000 ohms
jesus if your car is full injection it will be disconnected or dirty or the low valve will not work, which is the safest
carly the tunings are every 5000 kms or every 6 months approx. if you already have a year without doing it, it is likely that you already need it
pancho if your truck is diesel it makes the explosion by compressing the air it heats up and the diesel is injected to make the combustion therefore it does not need a spark but if it is gasoline it is likely that the coil is directly to the spark plug (generally fine above the caps are small squares screwed to the cap must bring 8 1 for each cylinder) and no longer have cables or distributor because the crankshaft sensor sends small pulses to the computer and it tells the injector when to open or close and the distribution of the spark without the need for a distributor
I have a Cherokee 93 engine 4.0 of 6 in line the ignition pill was damaged I changed it and now it fails to start but it does not match the engine and it makes the spark plugs very dirty it turns them black, 2 and XNUMX, I disconnect them and match them a little what do i do, thanks
cyril glez. your silverado 1500 firing order is 1-8-4-3-6-5-7-2
francisco hernandez check first that the cables are not changed the ignition order of your truck is 1-5-3-6-2-4 if it is good it is probable that the cables, lid or rotor do not work, you have to check that everything is in good condition
hello my father-in-law has problems with his mazda 262 because I help him I fix the kbza and I connect everything well but he doesn't want to turn on it gives him to be and as he wants to turn on but no
I want to know how do you put the cables in order of a
cherokee 95 v6 is to remove them but
I no longer knew how to put them in order, let's see who can help me
hello good afternoon I need your help to know what is the sequence to connect the spark plug wires of a chevy van 6 cil. 92
alonso the firing order for your chevy van 4.3L is 1-6-5-4-3-2
gabriel there is no cherokee V6 there is only V8 and L6
gabriel there is no cherokee V6 only V8 and L6
hello, I have a 1993 mitsubishi galant. I need the spark plug wires, the engine is 6 cylinder, it is a 6A12 multi 2000 V6 Japanese version... if there is any certain information about these and parts please let me know by email...
I have a 2003 expedition, 4.6l v8, the fault is that it starts the truck very well but when I put it in drive it kills itself as if it lacked gasoline pressure, they told me it was the transmission turbine but I don't think so, does anyone know what could be?
Hello, I would like to know the ignition order of a Cherokee 6l 4,0 mod. 86
evelin your cherokee firing order is 1-5-3-6-2-4
Hello
I would like to know your opinion about the replacement of the ignition cables of a pontiac G6 2006 v6 3.5L engine, since I am going to change them, I plan to put better ones than the stock ones, do you have any suggestions? also on the spark plugs, which are better 4 platinum or Iridium.
regards
Hello, I need to know the firing order of a Silverado 400 SS V8 vortec 5.7Lts. mod. 2002
I need spark plug wires for cherokee 94 v8 of maximum spark if there are
Hello, I would like to know why my car, Honda Civic, votes the spark plug cables, we changed the spark plugs and I started with that failure to vote the spark plugs once the car has run, I hope you can tell me something about it, regards. Good day.
I need the firing order of a 1996 voyage v6 3lts engine
For those who say that there is no Cherokee v6, they don't know anything. You were born when a week ago you searched for 1984,85,86, the Cherokee v6 2.4 or 2.6 came, if I'm not mistaken, I've been working with one for more than 7 years! Greetings to all and ask someone who knows that I am telling the truth!
For those who say that there is no Cherokee v6, they don't know anything. You were born when a week ago you searched for 1984,85,86, the Cherokee v6 2.4 or 2.6 came, if I'm not mistaken, I've been working with one for more than 7 years! Greetings to all and ask someone who knows that I am telling the truth!
Good afternoon, I have a 1994 Galant VR and I need a crankshaft, custom crankshaft shells, and std rings.
I have a 1.4 aveo I want to know if the cables are all the same, if the 1.6 ones give the 1.4 because the ones I bought are 1.6 and they don't work in my car...if not that, the coil is screwed up right?
GOOD NIGHT LOOK AT THE PROBLEM OF THE NEW CARS K IF THE RIGHT PARTS ARE NOT PUT ON IT, IT MAY NOT START OR HAVE ANY FAILURE OK IT WILL TAKE YOU TO TURN ON THE CHECK ENGINE HEADLIGHT I WORK IN AUTOMATIC MECHANICS ERIK77795@HOTMAIL.COM
I find the comments interesting, it's good that it exists
This space.
I want to change my gasoline engine for a diesel engine it is a Cherokee it has
4.lt engine. And I got a complete 1,6 jetta engine. What do you think?
it's possible?
regards
hello someone can help me and tried to find info on how to install spark plug wires for a chevy pick up year 93. Thanks
EXCUSE ME COULD YOU HELP ME WITH THE WINSTAR 96 DAGRAMA TO CONNECT THE SPARK PLUGS TO THE COIL
Good afternoon, will there be someone who can help me solve a spark plug problem in spark plug cables nissan 86, change cables, distributor cap, spark plugs, rotor, spark plugs and the spark persists? I commented that perhaps physical ground from the engine to the chassis and still persists. Thank you
the condenser man!!!!
ohhhhhhhhh
el4electronic ignition or platinums??? specifically what is your problem?
moya buna stardes I have a problem with nissan maxima 90 the problem is that only three cylinders are working for me and he changed injectors but it's still the same can someone help me as what is the problem please thanks
hey what is the problem k hase what is the fault write to ERIK77795@HOTMAIL.COM
hello, well, I have a chevynova year 70 and I want to put some colored spark plug cables on it, do you know which cable you want or do I have to look for ones for the model and car?
Good afternoon, how many ohms should a VW Golf 2006 1.8 coil have?
If the wires light up, you should change them because they lose energy and the spark doesn't make it to the spark plug. stwo.
What's up? I need a diagram on how to connect the spark plug cables of a dodge ram 250 because I disconnected them and I no longer remember how Ivan and I don't have the manual, please help because he no longer wanted to pull energy to start
Good morning, I have an explorer 97 5.0 and I changed the cables but the motor does not have enough power. it jerks when you step on it. what can i do
I have a Mercury Montannier 98 van, where do I get the spark plug cables. it is 8 cylinder. Thank you
HELLO, AS I KNOW WHICH CABLES MY CAR USES IN EACH PARTS SHOP THEY GIVE ME DIFFERENT ONES
EVEN IN SOME SPECIFICATIONS THERE ARE TWO TYPES OF CABLES. THANK YOU
spark plug cables for opel vectra 1.6 how should they be and/or category?
I HAVE A 2003 OPEL CORSA DIESEL AND I CANNOT REMOVE THE SPEED SENSOR
I have a Dakota 97 6 cyl. It starts but the engine does not start. They told me that it could be the idle control valve, is this true? If anyone has the answer please comment thanks.
hello, you know, I have a 2005 optra and you know that one of the cables from the vugias gets wet with oil and always after a while it starts to get disconnected, I mean, it's higher than the others, you see that the cables have a line up to where they have to enter when connecting to the vugia this thirteenth cable enters tight and there is no more to enter and a large part remains outside as it does not reach the bottom and that makes the car work unevenly the engine
aaa and the other thing you know that the skiquen yin lights up on my dashboard I don't know how to write it but it shows up on the scoreboard they tell me it's the oxygen sensor but it has been changed somewhere else they tell me I have to change a piece that goes on top of the engine one that where the gaces pass and that sends the information to the sensor it seems one that is called the termination of the rod I don't know how much and I have been put on a spending spree that influences and what I should do that is not an engine aguste something that is not tancaro thanks
I have a ford f 150 and I changed the cables but it still shakes me if someone has the answer please comment thanks
hello, the connectors of the spark plugs of the mazda 3 1.6 automatic, have some defined position or can be placed in any order. Thank you
no, that depends on the ignition order that the coil brings
I want to check if the spark plug cables are well connected in the distributor but I don't know which is the correct position of each cable in the distributor
COULD SOMEONE TELL ME IF THE 99 SEAT AROSA HAS AN ELECTRONIC CONTROL UNIT, BECAUSE THE WINDOWS GO UP AND DOWN WHEN THEY WANT TO, WHEN I CATCH A BOTTLE ALL THE LIGHTS TURN OFF, AND ALSO THE TEMPERATURE INDICATOR FAILS RANDOMLY AND IT'S NOT FROM THE CONNECTOR
THANK YOU
I would say that it is the starter motor that the armature is hitting the coils
check the fuse box x if the wires are coming together making a short circuit
how are the ignition cables of the doger spirit 1994
manuel martinez
I disconnected the spark plug wires to a 2002 mustang and now I don't know how they were
I have a 2013 hummer and it already broke down, can you help me?
I'm looking for some bojia cables for subaru impreza but they have to come with the land can you help me where I can get them
Hello, I would like to know what spark plug cable I need for a for aerostar year 95 and also what spark plugs
Good afternoon, excuse me, could someone tell me how the spark plug cables are going to the distributor? I should change the spark plugs and remove all the cables from the distributor and I don't know how they are going anymore.
car ? and number of cylinders
Could you give me the numbering of a 6-cylinder mustang
I need help to change some spark plugs to a doge caraban miny ban
Please, how many pounds of pressure does the gasoline pump have with the 5.7 vorteck engine?
HELLO I HAVE A PEUGEOT 404 MOD 1968, WITH A RENAUL 12 DISTRIBUTOR, I WANTED TO CHANGE THE WIRES AND WITHOUT KNOWING I KNEW ALL THE WIRES, AND WHEN I CHANGED THEM THE CAR DID NOT START SO I PUT THE OLD ONES BACK AND IT WOULD NOT START AND AFTER SO MUCH MOVEMENT THE WIRES STARTED AND ASKING ME THEY SAID THAT THE WIRES HAVE A SPECIFIC ORDER EACH ONE, COULD YOU HELP ME KNOW HOW TO PUT EACH CABLE IN ITS PLACE IN ITS ORDER, XKE THE CAR NOW STARTS BUT IT DOESN'T RUN WELL XKE SURELY THE WIRES ARE NOT THE PLACE THAT CORRESPOND. FROM ALREADY THANK YOU VERY MUCH.
how do i remove the spark plug cap from a 2001 mitsubishi eclipse
what are the spark plugs for a mitsubishi eclipse 2001 gt
tachi What are the springs that have the spark plug cables of the chevy for?
I have a problem and I changed the spark plug cables, I changed the spark plugs and the spark continues to come out, can you help me please, it is a 2002 Wolbaguens Goal vehicle
1000 engine
GOOD MORNING, MR. HOW MUCH ARE THE SPARK PLUGS GAUGE FOR A CHEROKE
Hello, I have a krro renol tuingo 2008 and I changed the cables of the bugias 3 kisses in less than 3 years, did it mean that there is something wrong in another part of the karro?
please give me the order in which the spark plug cables of a 98 ford explorer xlt go thanks
Just a correction friend, it's not bovine... it's COIL and it can reach far beyond 12000 volts, it can easily reach 47000 in modern vehicles
good afternoon friends can someone help me how to accommodate each of the spark plug cables to the coil of a 1994 saw truck 6 cylinders
good could you help me tell me the order of the spark plug wires of ana chevrolet s-10 model 94 vortec v6 engine
I changed the spark plugs of my truck and it shakes when I turn it on and I put the change in it why does that happen it is a 2001 grand cherokee laredo
Could you help me with the order of the cables of a 1991 Taurus and how do I find the first spark of the distributor
I need spark plug cable for 100 mt to work electric fences
Good afternoon, someone tell me how the connected cables of a Taurus, year 2000 ford 3.0
How about a greeting I would like to know if you could support me in passing me the diagram of the positions of the spark plug cables of a pontiac boneville 95 engine 3.8
please can you guide me, where are the air and gasoline nozzles in a cirrus 97
How are they in order? How can I know if it is in order?
How are they in order? How can I know if it is in order?
in various a 1.6 spark plug cable and a 2.0 seat cordoba... are they compatible?
Hello, I have a Ford Explorer 2000 6 cil SOHC... I have never changed the spark plug wires and lately the engine started to shake a lot and after 80 km/h, the engine does not respond... could it be the wires?
I don't think so... check the injectors... have you washed them??
Good article, I like it, thanks for enlightening us on the mechanics, blessings and keep publishing more articles.
Joseph Amador.
My 2011 Kia Rio has problems with the coil. Why is this the 2nd time that the coil of this car has to be changed? It loses power and a little drawing that looks like an engine lights up. What is a coil like? 2nd hands and there are people who don't take care of cars. I always take care of my cars, they are my friends as long as they don't leave me on foot. thanks.MC
Hello, I need a favor
for someone who knows what the correct order of the spark plug wires is like… I mean;
it's 1 2 3 4 from left to right or 4 3 2 1 from right to left looking straight at the engine of a nissan v16 year 95 red top… because I changed them and the car works kind of weird for me. please I need help
I need the diagram of how the fort 302 v8 engine spark plug cables go
engine diagram 1.3 16v fire
Good morning, could someone help me, I need a diagram of the speedometer of a Toyota Corolla 2011, it was stolen, but I already got it, the problem is that they cut all the cables that are connected to the synoptic or someone who can install it. Thank you
Excuse me, I have a maximum 98 and I would like to know if the spark plug caps are all the same as the three in the back and the three in the front.
what cables do you recommend for my neon 2003 2.0 l
How about I need a diagram of how to connect spark plug wires of a great am gt mod 99 3.8 since the coils are not marked
I am the mechanic, Tarecuato's cousin, and I have a problem with a Mazda 4000 model 94 v6 4.0. It has spark pulses for gasoline. but without power could you help me please
hello, can someone tell me how to change the aforementioned plug of the spark plugs of a truck s10 89 4 cil
How high are the spark plugs on a 1991 Cavalier calibrated?
Leave a message…
i removed the spark plug wires from a kia rio and i didn't notice how they were going and now i have a problem how to put the new ones on. Can somebody help me?
HOW TO ORDER THE WIRES OF BUICK REDENZBUOS 2002 I REMOVED THEM AND NOW I DON'T KNOW HOW THEY GO
who can pass me the connection diagram of the spark plug cables of a 10 chevrolet S-96 pick up I have doubts as to the order if it is from bottom to top or vice versa
how much are the spark plugs calibrated for a golf 1993 1.8lts
good evening to ask what cables do you recommend for ford pick up 93 with gas equipment to know many thanks
Hello, my Ford Explorer truck has two cables removed or disconnected from the spark plugs and it does nothing, which may be failing. According to the mechanic it is not spark plugs. I just did the engine. What can be?? Thank you.
Hello, I have a problem. We remove the cables from a 2002 windstar and we don't know the order in which they should be placed.
what champion spark plugs should a 6 ford explore v94 engine use
Good morning, what is the possibility that you explain to me how the spark plug wiring of the Mexican cavalier year 93 engine 2.8 6 cylinder
I have a doubt when I accelerate my car, it explodes and it stings like it doesn't accelerate well, which is what I should check (boneville 99) I don't remember if it's the spark plugs or what it is
Good morning, a question about the correct position of the spark plug cables of an Explorer v8 model 96 because they changed the cables but I don't see them the same as before, thanks regards
hello ……I have a problem and I can't detect it, it doesn't regulate well and when walking slowly it jerks and on high you hardly notice it, I adjusted the platinum and there are no improvements, thank you very much
I need help I took the coils out of my 2004 Honda civic to put the spark plugs and now I don't know which coil goes first because I collected them
Hello, I need help, I took the coils out of my Honda civic to change the spark plugs and now I don't know which one goes first because I stirred them up.
Excuse me, can you help me? I need to know how many power cables go to the distributor cap. What happens is that when it cuts off and I slow down, it accelerates too much and I remove the fuse and it doesn't turn off. If you could help me, my truck is an American Nissan pickup. 86 thank you very much
hello, a question my compasses to which calibration number goes for a spark plug for a cavalier 94 with 6 cylinders
hello I have a 2001 ful reno clio starts well but sometimes when leaving it does not accelerate after high it goes well they checked it step by step they cleaned where the throttle goes they changed the gasoline pump they changed a ceramic from the exhaust and the problem continues please can you help me
I have a cherokee sport in the morning it turns on well or how it wants to start to fail but after about an hour or two the cables take temperature, you can hear how it sparks and starts to fart a lot, could it be the cables?
My question is what happens when a car travels several kilometers without a spark plug cable, because after forcing it so much, it finally turned off, but since I haven't taken it to the mechanic yet, let me know if I have any complications.
Disconnect the cables from the receiver now I don't know how they are going someone could tell me
I have a Ford Ranger pic up
1988
I disconnected all the cables and I don't know how they go.
I hope you can help me
I have a lot of platinums/carburetor… My coil gets very hot and I took it to the electric one I put a new line from the fuse holder to the coil-it didn't work- I didn't put an external resistor on it either…. Now they tell me that I changed everything new to electronic ignition, what do I do please, others tell me to change a new point distributor and that's it
I would like to know the ignition order of the spark plugs of a 1999 ranger 4 cylinders and 8 spark plugs
kero I made a comment, I can, fart, go !! Can I.
Excuse me I have problems with my car it's a 4 honda accord lxde 2003 cyl that shakes when I put it in D, and I'm parked and when I turn on the air conditioning can someone give me some advice what to do.
Hi, my name is Xavier. I recently bought a 150 Ford F6 v1999 and recently changed the spark plug wires. Since I changed them, it's failing me, how can I identify the numbering of the wires and what would be the order of the spark plugs in the engine?
hello can you help me my ford f-100 truck makes me many explosions in low x the exhaust I already changed the cables of the spark plugs the spark plugs carburetor gaskets distributor cap and rotor and it's still the same I hope you can help me. Thank you.
Hi there. From what I have read it seems that the fact of changing only the ignition cables for high performance ones does not suppose an increase in power in the car, even so I needed some help since I have a 1.6 Ford Focus II 115 ti vct 2007cv and I am not able to find a set of premium cables (8mm, silicone...NGK, Magnecor, etc...) on any page in Spain or abroad, why is this? It is in the only motorization in which I do not see any of this, I do not know if it has to do with the fact that it is the variable distribution...
Anyway, if someone can enlighten me with a page or website that they know, I would appreciate it.
regards
hello, good afternoon, I am writing to see if there is someone who can help me. I will tell you that I changed the old spark plugs for new ones, the previous ones were 2 strobes and I changed them for 1 strobe, that is the first point, the 2. point is that I remove the spark plugs old and its octopus in general at the first and then I replaced the new spark plugs and installed them all at the same time, after everything is ready I put the octopus according to the order that it was previously.
Then I'm going to turn it on and it didn't start, the only thing it did was explosions 2 times and nothing else, I did this operation 3 times and now I have it thrown away.
I will wait for your comments.
Thank you