How the Tesla Roadster's cold gas engines work

  • They use compressed air at pressures up to 700 bar stored in carbon fiber tanks without using combustion.
  • They allow accelerations from 0 to 100 km/h in less than a second and short flight maneuvers in the Rocket version.
  • They require expensive refills of around $10.000 and refueling times of up to six hours for just five seconds of use.

The new Tesla Roadster has left everyone speechless with a presentation that seems straight out of a science fiction movie. Beyond being a powerful electric sports car, the biggest surprise is the inclusion of the so-called SpaceX Package , a propulsion system that allows the car to do things we previously thought impossible for a road vehicle, such as performing aerial maneuvers or accelerating to absurd speeds.

What truly breaks the mold is that this car doesn't rely solely on its electric motors for propulsion, but also utilizes cold gas propulsion . This technology, inherited directly from SpaceX's aerospace engineering, transforms the Roadster into a genuine beast capable of defying conventional physics, though it comes with costs and logistical limitations that will leave you speechless.

How exactly do these propulsion systems work?

First of all, you have to get rid of the idea that the car is carrying rockets with fire and explosions. There's no combustion, no kerosene, and no flames coming out the back. The secret lies in the physics of pressurized air , operating on a very simple principle taken to the extreme: compressing gas and releasing it at supersonic speeds.

The process is basically divided into two stages. First, the car uses an electric compressor powered by the high-voltage battery to draw in outside air and put it into tanks called COPVs. These tanks are lightweight but incredibly strong, as they are encased in carbon fiber to withstand brutal pressures, which can reach 700 bar.

The second phase is execution. When the driver presses the pedal to the floor or the system detects that it's necessary, valves open in the blink of an eye to release the compressed air through various nozzles . According to Newton's third law , by expelling the gas with such force in one direction, the car receives an equal and opposite thrust, launching it forward or upward.

Versions and thrust capabilities

https://www.instagram.com/reel/DenhfgFkyND/

Not all Roadsters come equipped the same, as Tesla has segmented the system according to the level of "craziness" the customer is looking for:

  • Performance version: It is the simplest and does not have propulsion systems, focusing solely on suction and active aerodynamics.
  • Thrust version: It includes four rear thrusters and a fuel tank of approximately 200 liters at 690 bar. It is designed primarily for improve acceleration longitudinal.
  • Rocket version: The jewel in the crown. It boasts 10 motors distributed throughout the chassis and a total fuel tank capacity of 600 liters (the passenger seat space is sacrificed to accommodate an additional 400 liters). It is the only one capable of rise from the ground and spin in the air.

Thanks to this system, the Roadster Rocket can reach 0 to 100 km/h in less than a second (specifically 0,81 seconds in some tests), far exceeding the traction that the most expensive tires on the market could offer.

The trick of suction and the floor effect

In addition to the rockets, the car employs a system of fans that draw air from underneath to generate massive downforce . This creates such a powerful vacuum effect that, according to the company, the vehicle could remain glued to the ground even upside down while stationary. To manage this, Tesla has used actuators similar to those of the Optimus Prime robot to move the active spoilers.

The harsh reality: costs and top-ups

This is where magic meets reality. Maintaining this system is prohibitively expensive and slow. A full refill is estimated to cost around $10.000 , meaning each second of flight costs nearly €1.800. Furthermore, the gas is released into the atmosphere and cannot be recovered.

Refueling time is another bottleneck. Currently, filling the tanks can take between two and six hours using an external high-pressure nitrogen connection, although Tesla is trying to reduce this time to about 30 minutes. It's important to note that the effective flight time is extremely short: a full tank only allows for about five seconds of lift.

Legal and production challenges

Bringing a car that takes off to the streets isn't easy. European homologation is a hurdle, as safety and braking regulations assume the wheels are always in contact with the asphalt. Therefore, the Rocket version isn't approved for public roads . Regarding availability, although it was unveiled years ago, production isn't expected until 2028 , and the versions with powertrains will be sold by invitation only.

This technological display, though it may seem like an expensive toy for millionaires, allows Tesla to refine thermal management and thrust control , knowledge that will eventually filter down to more conventional models. Ultimately, we have a vehicle that combines extreme suction and compressed air at industrial pressures to achieve performance that breaks all known limits, sacrificing practicality and a hefty wallet for a few seconds of aerial glory.


Add as preferred source in Google